Internal grinding is used for the finishing of internal holes and is carried out on an internal grinding machine or a universal cylindrical grinding machine. Through holes, non-through holes, cylindrical or conical holes, stepped holes and hole end faces can be processed.
Quick Detail:
Internal grinding is used for the finishing of internal holes and is carried out on an internal grinding machine or a universal cylindrical grinding machine. Through holes, non-through holes, cylindrical or conical holes, stepped holes and hole end faces can be processed.
Description:
The commonly used shapes of internal grinding wheels are flat and cup (see the figure below). Among them, the flat grinding wheel is the most commonly used, and the cup-shaped grinding wheel is more advantageous for grinding stepped holes and sections.
How to choose internal grinding wheel
The selection is based on the workpiece hole, and there should be an appropriate ratio between the two. Usually the diameter of the grinding wheel is 0.5~0.9 of the hole diameter.
The diameter of the workpiece hole | The diameter of grinding wheel |
12-17 | 10 |
17-22 | 15 |
22-27 | 20 |
27-32 | 25 |
32-45 | 30 |
45-55 | 40 |
55-70 | 50 |
70-80 | 65 |
80-100 | 75 |
PA Internal grinding wheel is used for grinding 420 stainless steel, Hardened to 50RC.
Advantages of internal grinding wheel
* Good surface finish and efficient
* PA abrasive has a more cutting force
Internal diamond grinding wheel are used because of their durability and their ability to cleanly cut the harder alloys, ceramics and cermet
SPECIFICATION
D25*T12*H6*X6 | D25*T24*H6*X6 |
D30*T12*H6*X6 | D30*T24*H12*X6 |
D35*T24*H6*X6 | D40**T12*H6*X6 |
D40*T24*H12*X6 | D50*T24*H12*X5 |
D50*T24*H12*X10 | D60*T6*H16*X10 |
D75*T24*H12*X10 | D100*T12*H12*X10 |
D100*T24*H12*X10 | D125*T25*H12*X10 |
D150*T25*H12*X10 | |
Special size can be design according to customers’ requirement |
Applications of CBN Internal Grinding Wheel
Grinding of con-rods ends in the auto industry
Grinding of hydraulic and pneumatic cylinders
CVJ ball-cage, inner and outer raceway
Hydraulic tappet of automobile motor
Grinding of bores of inner rings
Grinding of gears bores, collects
Pump stator of automobile, grinding of gun barrels
Roller, cylinder, flange cover of air-condition compressor
Grinding of inner and outer faces of ball & roller bearings
Features of CBN internal grinding wheel:
* High grinding efficiency
* High grinding precision
* Good consistency of workpiece size
* Long service life of grinding wheel
Model | Diameter (mm) | Bore Diameter (mm) | Height (mm) |
1A8 | 4 | 1.5 | 5 |
1A8 | 6 | 2 | 8 |
1A8 | 12 | 4 | 8 |
1A8 | 20 | 6 8 | 10 |
1A8 | 25 | 8 13 | 20 |
1A8 | 30 | 10 | 15 |
1A8 | 35 | 12 15 | 12 |
1A8 | 40 | 15 | 15 |
1A8 | 40 | 15 | 25 |
1A8 | 45 | 30 | 50 |
1A1W | 17.5 | 11 | 5.5 |
* Other size can be made according to customers requirements. |
Copyright © Zhengzhou Ruizuan Diamond Tool Co.,Ltd. All Rights Reserved — Privacy Policy